Hall Research HDMI+RS232+IR+PoH UTP (Sender), UHBX-S-PD

UHBX-S-PD sender module when paired with compatible receiver ( Hall Research model UHBX-R-PSE ), can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power over HDBaseT™) over distances of up to 150 meters (500 feet) using a single Cat6 cable. The pair can extend HDMI or single-link DVI video of virtually any resolution, to a maximum distance of 500 ft (150 m). Moreover, these extenders complies with Power-over-HDBaseT™ or PoH, hence only one end requires a power supply . The end identified as PSE (power sourcing equipment) injects power on to the Cat6 cable and the side identified as PD (powered device) is powered through the Cat6 cable. The PSE side requires connection of an AC adapter that supplies 5v DC, while the PD or WP(wall plate) side is simply powered through the RJ45 connector from the opposite side.

Full-duplex RS232 Serial Port extension is provided that can operate at any baud rate to 115,200 (independent of video activity). The extender can also extend IR from one end to the other. IR Detector and IR Emitter cables are sold separately. The IR extension preserves the modulation(carrier) frequency and provides compatibility to virtually any standard. It supports modulation range from 30 KHz to 60 KHz.

Features

• Extends HDMI or DVI video to 500 ft on just one Cat6
• Includes RS232 and IR extension in both directions
• Supports virtually all HDMI and DVI resolutions including 4Kx2K
• Only one end requires power, other side is powered via UTP
• Power-over-HDBaseT™ meets IEEE 802.3af standard
• Sturdy metal enclosures with mounting provisions
• Complies fully with HDBaseT™ standard
• Runs from just one +5vDC supply
• RS232 Supports all baud rates regardless of presence of video
• IR extension is carrier frequency agnostic and supports 30 KHz to 60 KHz modulation to provide compatibility across all IR standards
• Fully isolates ground between TX and RX sides
• Compact, Rugged, Reliable, and Economical
• Made in USA 

Specifications

• Max Distance:
  Standard Mode (STD): 330 ft (100m)
  Long Reach Mode (LR) : 500 ft (150m)
• Video Standards:
  DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
• Signal Type:
  TMDS
• Connectors:
  Locking HDMI
• Video Resolutions:
  DVI: VGA (640x480) to WUXGA (1920x1200)
  HDTV: 480i to 1080p
  Digital Cinema: 4K (4096x2160)
• Audio Formats:
  All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
• DDC:
  Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
• CEC:
  Pass-Thru DDC for Consumer Electronics Control compatible devices
• RS232:
  Bi-directional (full-duplex) any baud rate upto 115,200
• IR:
  Extended in both directions. Carrier modulation range from 30 KHz to 60
  KHz
• PoH:
  Power-over-HDBaseT™ meets IEEE 802.3af standard. PD side identifies as
  Class 2 (3.84–6.49 watts). Actual power consumption of PD side is 5.5 watts
  max
• Power Supply:
  100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
  Actual DC current (powering both –PSE and –PD sides) 1.8A max
• Power:
  Sender: 3.5 watts (12 BTU) maximum
  Receiver: 5.5 watts (19 BTU) maximum
• Temp/humidity:
  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
  Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
• Cooling:
  Convection
• Mounting:
  End plates have L bracket with hole for surface mounting
• Enclosure:
  Metal (Steel ends and Aluminum extrusion)
• Dimensions:
  1.18" H x 4.13" W x 4.57" D (30mm H x 105mm W x 116mm D) Depth excludes connectors
• Product weight:
  Sender: 9.3 oz (0.58 lb or 264 g)
  Receiver: 10 oz (0.63 lb or 284 g)
  Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, power supply, power cord, HDMI cable, manual, and packaging
• Vibration:
  ISTA 1A in carton (International Safe Transit Association)
• Safety:
  CE
• EMI/EMC:
  CE, FCC Class A
• MTBF:
  90,000 hours (Calculated Estimate)
• Warranty:
  2 years parts and labor

About Hall Research

Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.